研究成果

(A)期刊論文

TRANSACTION AND JOURNAL PUBLICATIONS:

  1. S. Y. Chen, M. S. Ju and Y. G. Tsuei, “Linear Structure Control by Modal Force Technique,” JSME International Journal, Series C, Vol. 36, No. 2, June 1993, pp. 203-208. (SCI, NSC81-0401-E-006-37)
  2. S. H. Wu, S. Y. Chen, and Y. G. Tsuei, “Localization Phenomena in Structures with Cyclic Symmetry,” The Chinese Journal of Mechanics, Vol. 11, No. 3, September 1995, pp. 195-203. (EI)
  3. S. Y. Chen and Y. G. Tsuei, “Estimation of System Matrices by Dynamic Condensation and Application to Structure Modification,” AIAA Journal, Vol. 36, No. 11, November 1995, pp. 2199-2204. (SCI)
  4. S. Y. Chen, M. S. Ju and Y. G. Tsuei, “Extraction of Normal Modes for Highly Coupled Incomplete System with General Damping,” MECHANICAL SYSTEMS AND SIGNAL PROCESSING, Vol. 10, No. 1, January 1996, pp. 93-106. (SCI), (NSC83-0401-E-006-126)
  5. S. Y. Chen, M. S. Ju and Y. G. Tsuei, “Estimation of Mass, Stiffness and Damping Matrices from Frequency Response Functions,” JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, Vol. 118, No.1, 1996, pp. 78-82. (SCI), (NSC84-2212-E- 006-038)
  6. S. Y. Chen, M. S. Ju and Y. G. Tsuei, “Extraction of Normal Modes from Contaminated Measurement with Noise for Highly Coupled Structures,” JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, Vol. 118, July 1996, pp. 430-435. (SCI), (NSC83- 0401-E-006-126)
  7. S. Y. Chen, “System Matrices Identification of Structure: An Insensitive Procedure for Data Point Configurations,” JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, Vol. 45, No. 1, March 2002, pp. 349-355. (SCI, Times Cited:2/0, NSC89-2212-E-269-015)
  8. S. Y. Chen, “A System Matrices Reduction Method for Damped Systems,” JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, Vol. 48, No. 4, December 2005, pp. 681-687. (SCI, Times Cited:3/0)
  9. S. K. Yang, M. H. Chang and S. Y. Chen, "A New Sufficient Condition to Determine the Robust Pole-clustering for systems with Structured Uncertainties," Journal of the Chinese Society of Mechanical Engineers, Vol.27, No.3, October 2006, pp.383-388. (EI)
  10. 陳炘鏞、黃榮華、 楊錫凱，“熱配馬達轉子對轉軸動態特性之影響與其有限元素建模之探討”, Journal of Technology, Vol. 21, No. 1, October 2006, pp. 61-67。
  11. 陳炘鏞、徐榮駿，“高速主軸結構設計問題之分析與修改”, Journal of Far East University, Vol. 24, No. 3, September 2007, pp. 287-296。
  12. Shin-Yong Chen, Chieh Kung, Te-Tan Liao and Yen-Hsien Chen, “Dynamic Effects of the Interference Fit of Motor Rotor on the stiffness of a High Speed Rotating Shaft,” Transactions of the Canadian Society for Mechanical Engineering, Vol.34, No.2, 2010, pp. 243-261. (SCIE, Times Cited:2/2)
  13. Shin-Yong Chen, Chieh Kung and Jung-Chun Hsu, “Dynamic Analysis of a Rotary Hollow Shaft with Hot-fit Part using Contact Elements with Friction,” Transactions of the Canadian Society for Mechanical Engineering, Vol.35, No.3, 2011, pp. 461-474. (SCIE, Times Cited:5/4)
  14. Shin-Yong Chen, Shyi-Kae Yang and Yan-Ting Guo, “An Optimal Equivalent Finite Element Modeling for a Hollow Shaft,” Journal of the Chinese Society of Mechanical Engineers, Vol. 33, No.1, 2012, pp. 67-74. (SCIE, Times Cited:0/0)
  15. Chieh Kung, Shin-Yong Chen, Te-Tan Liao and Te-Ming Chou, “Finite Element Modeling to a Pallet with Repeated Lattice Pattern,” Applied Mechanics and Materials Vol. 145, 2012, pp. 88-92. (EI)
  16. Kuan-Chen Lin, Shyi-Kae Yang and Shin-Yong Chen, “Biaxial Stage Contouring Control with a Novel Anti-Windup PID Controller Strategy,” Advanced Science Letters, Vol. 8, 15 April 2012, pp.627-631. (SCI,)
  17. Chieh Kung, Shin-Yong Chen and Te-Tan Liao, “Finite Element Analyses on Dynamic Responses of a Portable Instrument Subjected to Drop/Impact,” Advanced Science Letters, Vol. 9, 30 April 2012, pp. 1-7. (SCI,)
  18. Shin-Yong Chen, Chieh Kung and Shyi-Kae Yang, “Modeling and Verification of a Rotary Shaft with Hot-fit Components Using Contact Element,” Advanced Science Letters, Vol. 9, 30 April 2012, pp. 301-306. (SCI,)
  19. Shin-Yong Chen, “An equivalent direct modeling of a rotary shaft with hot-fit components using contact element modal analysis results,” Computers & Mathematics with Applications, Vol. 64, No. 5, 2012, pp. 1093-1099. (SCI)
  20. Chun-Ta Chen, Shin-Yong Chen, Chien-Hsiang Liao and Shi-Chang Zeng, (2013), “Visualization of Nanomanipulation Using an Interactive Virtual Environment,” Applied Mechanics and Materials, Vols. 284-287, pp. 3468-3472. (EI)[ISSN: 1662-7482]
  21. Shin-Yong Chen, “The Dynamic Analyses and Verifications of a Hollow Shaft with Hot-fit Component Using 3D Finite Contact Element,” Transactions of the Canadian Society for Mechanical Engineering, Vol.37, No.1(Sep.), 2013, pp. 21-38.
  22. Chun-Ta Chen, Shin-Yong Chen, Chien-Hsiang Liao and Shi-Chang Zeng, “An Interactive Nanomanipulation Visualization Based on Molecular Dynamics Simulation and Virtual Reality,” Transactions of the Canadian Society for Mechanical Engineering, Vol.37, No.3(Dec.), 2013, pp. 991-1000.[ISSN: 0315-8977]
  23. Shin-Yong Chen and I-Feng Lin, “Investigation of clamping force for a high-speed shaft with toolholder using contact element analysis,“ Journal of Vibroengineering, Vol.16, No.3(May), 2014, pp. 1334-1342. [ ISSN:1392-8716]. (MOST 102- 2221-E-269-004)
  24. Shin-Yong Chen and I-Feng Lin, “Study on the non-uniform contact between the shaft-taper hole and toolholder for a high speed spindle,“ Journal of Vibroengineering, Vol.16, No.4(June), 2014, pp. 1934-1943.[ ISSN:1392-8716]. (MOST 102- 2221-E-269-004)
  25. Shin-Yong Chen and Chin-Yu Tsao, “The effects of rotating speed and temperature difference on the dynamic characteristics of a high speed shaft with hot-fit part,” Journal of Far East University, Vol.31, No.3(Dec.), 2014, pp. 235-243. [ ISSN: 1811-816X]
  26. Shin-Yong Chen and Jhe-Wei Lin, “The study of the hole geometric patterns for a motor rotor on the dynamic stiffness of rotor-shaft system,” Journal of Far East University, Vol.32, No.3(Dec.), 2015, pp. 295-304. [ ISSN: 1811-816X] (MOST 104- 2221-E-269- 009)
  27. Shin-Yong Chen and Chin-Yu Tsao, “Modeling of a High Speed Shaft with Hot-fit Parts and its Application on Rotor Dynamic Analysis,” Journal of Far East University, Vol.33, No.3(Dec.), 2016, pp. 233-242. [ ISSN: 1811-816X]
  28. Shin-Yong Chen and Jhe-Wei Lin, “The Hole Machining Type Design for the Motor Rotor with the Consideration of Dynamic Stiffness of Rotor-Shaft System,” Journal of Far East University, Vol.36, No.2(Aug.), 2019, pp. 51-62. [ ISSN: 1811-816X] (MOST 104- 2221-E-269- 009)
  29. Shin-Yong Chen and Jia-Xuan Lu, “The Study of Finite Element Modeling for Particle Damping System,” Journal of Far East University, Vol.37, No.3(Dec.), 2020, pp. 165-176. [ ISSN: 1811-816X]
  30. Shin-Yong Chen and Jia-Xuan Lu, “The Design Application of Finite Element Modeling for Particle Damping,” Journal of Far East University, Vol.39, No.3(Dec.), 2022, pp. 83-94. [ ISSN: 1811-816X]

PROCEEDINGS AND CONFERENCES:

  1. S. Y. Chen, M. S. Ju and Y. G. Tsuei, “A Simple Method for Extracting of Normal Modes,” Proceedings of 14th ASME Biennial Conference on Mechanical Vibration and Noise, DE-Vol. 64, Albuquerque, September 1993, pp. 1-8. (SCI)
  2. P. J. Cheng, S. Y. Chen, Y. G. Tsuei, and Eric K. L. Lee, “Structural Modification by Frequency Response Functions,” Proceedings of the 13th IMAC, Nashville, Tennessee, February 1995, pp. 285-292.
  3. S. Y. Chen, M. S. Ju and Y. G. Tsuei, “Extraction of Normal Modes from Contaminated Measurement with Noise for Highly Coupled Structures,” Proceedings of the 13th IMAC, Nashville, Tennessee, February 1995, pp. 285-292.
  4. S. Y. Chen and Y. G. Tsuei, “Effect of Parameter Identification on Modeling of Viscous and Structural Damping,” Proceedings of the 15th IMAC, Orlando, Florida, February 1997, pp. 1139-1144.
  5. S. Y. Chen and Y. G. Tsuei, “Dynamic Condensation and its Interpretation,” Proceedings of the 15th IMAC, Orlando, Florida, February 1997, pp. 1249-1251.
  6. S. F. Hou, S. Y. Chen and M. S. Ju, “LIGA-like 製程製造微型陀螺儀,” 第三屆奈米工程暨微系統技術研討會, May 4-5 1999, pp. 3-153~159.
  7. S. Y. Chen, “A Frequency-Domain Method for Identifying System Matrices of Structure from Modal Testing Data,” Proceedings of the 18th National Conference on Mechanical Engineering, The Chinese Society of Mechanical Engineers, December 7~8, 2001, pp. 279-286.
  8. 陳炘鏞，“溫度監控式高速主軸自動跑合系統開發”，第十三屆全國自動化科技研討會，June 17-18, 2004, pp. 1047-1054.
  9. 陳炘鏞、黃榮華、 楊錫凱，"高速主軸熱配馬達轉子效應與其有限元素建模之探討"，中國機械工程學會第二十二屆全國學術研討會論文集，Nov. 25-26, 2005, pp. 859-863.
  10. 陳炘鏞、陳諺賢，“高速空心轉軸之轉子干涉配合效應與其限元素建模“，中國機械工程學會第二十三屆全國學術研討會論文集(C3-017)，Nov. 24-25, 2006, pp. 392-397。(NSC95-2622-E-269-007-CC3)
  11. 周德明、陳炘鏞、龔傑、李嘉芸，“彈性筒夾幾何設計對刀具夾持度之分析“，中國機械工程學會第二十三屆全國學術研討會論文集(C8-003)，Nov. 24-25, 2006, pp. 318-323。
  12. 周德明、陳炘鏞、龔傑、李嘉芸，“對以彈性筒夾為刀具夾持之幾何參數分析“，中華民國力學學會第三十屆全國力學會議學術研討會論文集，Dec. 15-16, 2006, pp. 1-6。
  13.  陳炘鏞、楊錫凱、周德明、徐榮駿，“高速主軸拉刀機構之分析與修改“，中國機械工程學會第二十四屆全國學術研討會論文集(B11-0010)，Nov. 23-24, 2007, pp. 1600-1605。
  14. 周德明、陳炘鏞、張惠琳、張俊傑，“變間距鰭片在水冷式散熱器中之熱傳效能研究“，中國機械工程學會第二十四屆全國學術研討會論文集(A01-0081)，Nov. 23-24, 2007, pp. 315-320。
  15. 楊錫凱、陳炘鏞、曹以明、曾志成、林後安，“基於IEC61131-3標準的SoftPLC跨平台實現機制建構“，中國機械工程學會第二十四屆全國學術研討會論文集(B18-0013)，Nov. 23-24, 2007, pp. 2063-2068。
  16. 楊錫凱、陳炘鏞、林後安、陳怡樺、黃舜堯、林冠緯，“基於瀏覽器監控之分散式控制系統建置“，智慧型系統工程應用研討會，March. 20, 2008。
  17. 陳炘鏞、龔傑、徐榮駿，“心軸-轉子系統熱配效應之最佳化探討“，中國機械工程學會第二十五屆全國學術研討會論文集(B10-12)，Nov. 21-22, 2008。
  18. 楊錫凱、陳炘鏞、張名輝、林後安、黃致原，“基於乙太網路之分散式控制系統控制器切換與網頁監控設計“，中國機械工程學會第二十五屆全國學術研討會論文集(D16-09)，Nov. 21-22, 2008。
  19. 陳炘鏞、郭晏廷、王家豪、徐榮駿，“高速空心轉軸轉子干涉配合之有限元素最佳化建模“，中國機械工程學會第二十六屆全國學術研討會論文集(D17-33)，Nov. 20-21, 2009。
  20. 陳炘鏞、龔傑、徐榮駿、郭晏廷，“以接觸元素探討具熱配元件之轉軸動態分析“，中國機械工程學會第二十六屆全國學術研討會論文集(B10-12)，Nov. 20-21, 2009。
  21. Shin-Yong Chen and Shyi-Kae Yang, “The Optimal Study of Finite Element Modeling for a High Speed Hollow Shaft with a Hot-fitted Motor Rotor,” Proceeding of IEEE, International Symposium on Computer, Communication, Control and Automation, Tainan, Taiwan, May, 5-7, 2010, Vol. 2, pp. 298-301. (EI)
  22. Shyi-Kae Yang, Shin-Yong Chen, Ming-Hui Chang and Jian-Jhou Shyu, “Anti-Windup Compensation of Saturated Systems with Phase-lead /Phase-lag Controller,” Proceeding of IEEE, International Symposium on Computer, Communication, Control and Automation, Tainan, Taiwan, May 5-7, 2010, Vol. 2, pp. 345-348. (EI)
  23. 陳炘鏞、徐榮駿、郭晏廷、盧姿榕、唐維隆，“考慮摩擦之具熱配元件轉軸有限元素動態分析“，中國機械工程學會第二十七屆全國學術研討會論文集(BB08-013)，Dec. 10-11, 2010, B---pp.791-796。
  24. 龔傑、陳炘鏞、周德明、柯貴登，“手攜式量測儀器殼體結構之衝擊響應分析“，中國機械工程學會第二十七屆全國學術研討會論文集(CC08-002)，Dec. 10-11, 2010, C---pp.917-922。
  25. Cheng-Chi Wang, Shin-Yong Chen, Ming-Jyi Jang and Te-Tan Liao, “Application of Hybrid Method to the Influence of Bearing Number on Elliptic Gas Bearing System, ” Proceedings of IEEE, the 2011 International Conference on Fluid Power and Mechatronics, Beijing, China, Aug. 17-20, 2011, pp. 164-168. (EI)
  26. Chieh Kung, S. Y. Chen and T. T. Liao, “Finite Element Analyses on Dynamic Responses of a Portable Instrument Subjected to Drop/Impact,” Proceeding of First International Conference on Engineering and Technology Innovation 2011 (ICETI2011, S1013), Kenting, Taiwan, Nov. 11-15, 2011, pp. 154.
  27.  Chieh Kung, Shin-Yong Chen, Te-Tan Liao and Te-Ming Chou, “Finite Element Modeling to a Pallet with Repeated Lattice Pattern,” Proceeding of First International Conference on Engineering and Technology Innovation 2011 (ICETI2011, B2050), Kenting, Taiwan, Nov. 11-15, 2011, pp. 342.
  28. Kuan-Chen Lin, Shye-Kae Yang and Shin-Yong Chen, “Biaxial Stage Contouring Control with A Novel Anti-Windup PID Controller Strategy,” Proceeding of First International Conference on Engineering and Technology Innovation 2011 (ICETI2011, B1067), Kenting, Taiwan, Nov. 11-15, 2011, pp.34.
  29.  Shin-Yong Chen, Chieh Kung and Shyi-Kae Yang, “Modeling and Verification of a Rotary Shaft with Hot-fit Components Using Contact Element,“ Proceeding of First International Conference on Engineering and Technology Innovation 2011 (ICETI2011, J1001), Kenting, Taiwan, Nov. 11-15, 2011, pp. 128.
  30. Chun-Ta Chen, Shin-Yong Chen, Chien-Hsiang Liao, Shi-Chang Zeng, “Visualization of nanoManipulation Using an Interactive Virtual Environment,“ Proceeding of Second International Conference on Engineering and Technology Innovation 2012 (ICETI2012, Q1045), Kaohsiung, Taiwan, Nov. 02-06, 2012, pp. 304.
  31. Chen, S. Y. and I. F. Lin, “Investigation of clamping force for a high-speed shaft with toolholder using contact element analysis,“ Proceedings of International Conference on Applied Technology (ICAT2013), Sun Moon Lake, Nantou, Taiwan, October 18-22, 2013, pp. 110. (MOST 102- 2221-E-269-004)
  32. Shin-Yong Chen, Te-Tan Liao and I-Feng Lin, “Study on the non-uniform contact between the shaft-taper hole and toolholder for a high speed spindle,“ Proceedings of 5th International Conference on Nonlinear Science and Complexity, Xi’an Jiaotong University, Xi’an, China, Aug. 4-9, 2014, pp. 23. (MOST 102- 2221-E-269-004)
  33. Shin-Yong Chen and Chin-Yu Tsao, “The rotor dynamic analysis with speed-dependent models for a high speed shaft with hot-fit part,“ Proceedings of International Multi-Conference on Engineering and Technology Innovation 2015 (IMETI 2015), Kaohsiung, Taiwan, Oct. 30- Nov. 03, 2015, pp. 93. (MOST 104- 2221-E-269-009)
  34. 陳炘鏞、林哲偉、呂佳軒，“馬達轉子內孔加工型態對轉子-心軸系統動態剛性的研究“，中國機械工程學會第三十二屆全國學術研討會論文集(0087)， Dec. 11-12, 2015。(MOST 104- 2221-E-269-009)
  35. Shin-Yong Chen, Jhe-Wei Lin, Jia-Xuan Lu and Te-Tan Liao, “The Hole Type Design of Rotor for Considering the Dynamic Stiffness of Rotor-Shaft Assembly,“ Proceedings of IEEE, 14th International Conference on Industrial Informatics, University of Poitiers, Futuroscope-Poitiers, France, July. 18-21, 2016, pp. 1268-1271. (EI) (MOST 104- 2221-E-269-009)
  36. 陳炘鏞、呂佳軒、許昭聯，“抗振搪刀桿之設計與驗證”，中國機械工程學會第三十三屆全國學術研討會論文集(#1552)， Dec. 3-4, 2016，工業技術研究院，新竹。
  37. 陳炘鏞、呂佳軒，“抗振搪刀桿之有限元素建模與驗證”，中國機械工程學會第三十四屆全國學術研討會論文集(#11114)， Dec. 1-2, 2017，勤益科技大學，台中。
  38. 陳炘鏞、呂佳軒、陳柏璋，“抗振刀把之有限元素建模與驗證”，中國機械工程學會第三十五屆全國學術研討會論文集(#0041)， Nov. 30- Dec. 01, 2018，中正大學，嘉義。

(B). 證照

  1. 教授證書，教字第140491號
  2. 電腦技能基金會-工程圖學與機械製圖認證 證號: NPEG100700264 
  3. 財團法人中華民國電腦技能基金會-企業電子化資料分析師(巨量資料處理與分析) 證號: 431150800000300
  4. 台灣嵌入式暨單晶片系統發展協會-單晶片能力認證 證號: TEC060179
  5. Microsoft Corporation-Microsoft Office Specialist Expert for Office Word 2010 Expert 證號: wU4Jc-FMEL
  6. Microsoft Corporation-Microsoft Office Specialist Expert for Office Excel 2010 Expert 證號: wmqYS-4SdV
  7. ISO 14064-1:2018 Lead Verifier Training Course溫室氣體盤查主導查證員證,證書編號:20230830001
  8. ISO 14067:2018 Lead Verifier Training Course產品碳足跡 主導查證員訓練課程,證書編號:20240918001

(C).其他

  1. 指導學生參加2017年全國isPLC創新創意競賽榮獲學生組第一名，106/06/24。
  2. 指導學生參加2022年雲創盃智慧生活創新應用競賽榮獲最佳設計獎及最佳人氣獎，111/12/02。